If you’ve ever had to splice into an ECU wiring harness to hook up some gadget or other you’ll know how heartbreaking it is to cut open the nice loom and hack it all to pieces. It’s pretty worrying for those that still hang on to some semblance of a warranty too because if Nissan happen to catch your handy work you might have some ‘splainin to do.

Wiring harness patches offer the perfect solution to this problem, they offer a passthrough matched set of plugs and sockets with a short length of wiring in between for all your patching adventures. Remove the harness extension and you’re back to stock!

This latest version, just released, now features coverage for all three sockets on the GT-Rs ECU giving you access to any signal that might pass it’s way.

Hit up the link below to order yours…

リンク: Autosport ECU Wiring Harness for Nissan GT-R @ SpeedForSale

SpeedForSale.com, パーツ autosport, ecu, gt-r, gtr, harness, nissan, patch, r35, SpeedForSale.com, wiring

The Nissan GT-R aftermarket scene has taken off in a big way since launch and there’s loads of parts out there for owners considering modifying their new toys.

If you’ve ever turned a spanner before you’ll know the satisfaction of fixing or installing something on your car before and Jeremy from SpeedForSale has put together 10 new guides to help out on specific installation steps for GT-R upgrade parts.

Each guide comes with instructions and photos for the those so inclined and so far cover installation of:

• Heavy Duty Wastegate Actuator Installation and Adjustment
• Exhaust Downpipes
• HKS EVC6 Boost Controller
• HKS Super Sequential Blow Off Valve (SSBOV) Kit
• Cat-back exhaust system and Y-pipe
• Nissan JDM Front and Rear Clear Side Marker
• Stainless Steel Braided Brake Lines
• Anti-Sway Bar
• Sparco Harness Bar
• Spark Plugs

Each of the upgrades can also be sourced from SpeedForSales.com as well. So if you’re looking for a project you may very well have found one – or two to keep you busy here.

Thanks Jeremy for the work putting these together and the link.

リンク: SpeedForSale.com FAQs / DIY Installation Guides for Nissan GT-R

GT-R ニュースヘッドライン, SpeedForSale.com diy, faq, gt-r, gtr, install, nissan, r35, SpeedForSale.com, tuner

The Type1 Racing exhaust for the Nissan GT-R is due in less than a months time now and what should be final pricing is up online already. We also have a new dyno chart we hadn’t seen before comparing each T1R Exhaust stage from the turbos back.

The T1R 90R Cat back exhaust in stainless will set you back $1,890 USD. It’s manufactured in SUS316 grade stainless and offers a 90mm main pipe split into two 70mm rear pipe sections. It will go on sale in April and should be available for pre-order now.

The T1R Y-Pipe also goes on sale in April this year. It’s made from the same SUS316 grade stainless steel and features a pair of 76.3mm pipes combined into a single 90mm diameter pipe. Two flex joins insure it will not suffer cracking under stress at high temperatures. The price? Just $619 USD.

We’ll have a video of these come April when SpeedForSale get their hands on one installed on their own GT-R.

Thanks Jeremy@SpeedForSale for the update.

リンク: Type1 Racing (T1R) Products at SpeedForSale.com
リンク: Type1 Racing ウェブサイト

SpeedForSale.com, Type1 Racing gt-r, gtr, nissan, r35, SpeedForSale.com, T1R, Type1 Racing

Type1 Racing finished off their complete turbo back exhaust solution with the release of these turbine outlet pipes recently. These de-cat outlet pipes are made from SUS316 grade stainless and are 76.3mm in diameter and are completely tig welded.

They also ship with the T1R O2 fix to prevent the “Check Engine Light” condition some guys report after fitting aftermarket de-cat front pipes. Check after the jump for a photo of that installed.

Fitted together with the T1R 90R exhaust and mid-pipes on the AJ Racing GT-R the guys dynoed the car and measured a 60hp and 50 lb/ft gain over the standard exhaust. The front pipes alone accounted for 10hp and 11 lb/ft of torque at peak with as much as a 30 hp improvement just from the front pipes in the midrange.

Since there’s no catalytic converters, these pipes save almost 7 kg over the OEM versions. When released in early April 2009 they will go on sale for $1050 CAD or around $795 USD.

ソース: Type1 Racing Blog and NAGTROC
リンク: Type1 Racing ウェブサイト

Read more…

Type1 Racing, パーツ gt-r, gtr, nissan, r35, SpeedForSale.com, T1R, Type1 Racing

In response to the demand for locally made exhausts for the Nissan GT-R, Canadian based Type1 Racing have today announced their T1R 90R exhaust system.

The T1R 90R will be available in 304 stainless and full titanium versions. Both versions feature titanium tips for that tough burnt titanium look at the back. The exhaust features a 90mm diameter main pipe with 76mm piping after the mufflers.

The stainless T1R 90R will cost around $1500 USD when it’s out in spring of ’09.

Type 1 Racing also announced their upcoming T1R SS front pipes. This Y-pipe is made from 304 stainless and features two 65mm diameter from the turbine outlet pipes into one single 90mm pipe.

The T1R SS will be compatible with the standard exhaust but after market cat back exhaust is recommended. It should be available for Christmas time at around the $500 USD mark.

ソース: Type One Racing via AJ-Racing @ NAGTROC

Type1 Racing, パーツ gt-r, gtr, nissan, r35, SpeedForSale.com, T1R, Type1 Racing